background image

 

 

19 

 

5

 

Q & A     

a.

 

What is the function of the backplane?       

A: The backplane is the bridge which connects the hard drives and exports the signal to the 
motherboard. Also, the backplane provides the LED signals indicating the status of the hard 
drives, and alarming when the system temperature is abnormal. 

 

b.

 

Does the backplane support 6Gb SAS? 

A: The InWin IW-RS110-07 is accommodated with 12Gb SAS backplane by default. The 12Gb 
SAS  connector  interface  (SFF-8643)  is  not  compatible  with  6Gb  SAS.  InWin  provides 
OEM/ODM services, so customers may contact InWin sales reps for customization. 

 

c.

 

Does the chassis support 3.5

"

, 2.5

"

, SAS and SATA drives? Can I mix the different types of 

drives in an enclosure? 

A: The InWin IW-RS110-07 supports 2.5" (15mm) form factor’s SAS/SATA disks. Yet, to reach 
the  best  performance,  we  recommend  following  the  motherboard  or  RAID  controller 
vendors’ instructions. 

 

d.

 

Does the chassis support SSDs or flash NVMe drives? 

A: SAS/SATA and NVMe SSD connections can be attached to the InWin IW-RS110-07. We 
recommend customers refer to InWin’s compatibility list to confirm if the SSDs are listed, or 
please contact InWin’s sales reps for better reference. 
 

e.

 

If I don’t need the front cover, can I have the standard handle?

 

A: The InWin IW-RS110-07 supports both the standard handle and the bezel handle. If you 
would like your chassis with a standard metal handle, please contact your local sales reps to 
purchase the bezel package. 

 

f.

 

Can it support small form factor motherboards such as M-ATX and Mini-ITX? 

A: The InWin IW-RS110-07 supports motherboards that range from Mini-ITX to EEB. Unless 
you would like to mount a customized motherboard, which will not meet Intel’s standard, 
you will need to contact InWin’s partners or sales reps for customization services.   

 

g.

 

Do I need a RAID controller card to connect the backplane? 

A: If you would like to construct a solid hardware  RAID system, it is required. However, 
whether  you  should  use  the  RAID  controller  card  or  not  depends  on  your  purpose  and 
budget. We recommend discussing with InWin’s channel partners for their suggestions. 
 

Summary of Contents for IW-RS110-07
























Reviews: