InWin IW-RS216-07 User Manual Download | Manualshive

Page: 17 / 19

background image

3.2 Mini-SAS HD & OCuLink Backplane

3.3.1 OCuLink Backplane Connection (Top Layer Type 1 & 2)

3.3.2 Mini-SAS HD & OCuLink Backplane Connection

3.3 Backplane Connection

17

Bottom Layer – 3.5"/2.5"(15mm) x 8 SSDs

The IW-RS216-07 supports NVMe SSDs through OCuLink x maximum 16 connectors, and the backplane
is backward compatible with Mini-SAS HD.

Host Side

HDD Side

Please use the SFF-8611 cable to connect to the motherboard or RAID/HBA controller card. One of the
OCuLink connectors is only used for SAS/SATA data transfer rates. If there are no OCuLink connectors
on MB/HBA/Raid controller card, cable SFF-8611 can be replaced with SFF-8611 to SFF-8643.
Please refer to the backplane user guide for more information.
For a quick installation video, please visit

07 Series Oculink Backplane Connection

For Mini-SAS HD connector, please use the SFF-8643 cable to connect to the motherboard or RAID/
HBA controller card. For OCuLink connectors, please use the SFF-8611 cable to connect to the
motherboard or RAID/HBA controller card.
For a quick installation video, please visit

07 Series SAS/SATA Backplane Connection

«
...
15
16
17
18
19
»

Summary of Contents for IW-RS216-07




















Reviews:

No comments

Related manuals for IW-RS216-07

Enterprise Filter Authentication R3000

Brand: 8e6 Technologies Pages: 66

Brand: Lattice Semiconductor Pages: 15

nForce 680I LT SLI

Brand: Nvidia Pages: 80

Surround Dongle

Brand: Sennheiser Pages: 18

Brand: Keithley Pages: 71

Brand: Altera Pages: 42

DesignCore RVP-TDA3 Series

Brand: D3 Pages: 34

8677 - BladeCenter Rack-mountable - Power Supply

Brand: IBM Pages: 126

Power System H924

Brand: IBM Pages: 48

EK-UNI Holder D5 V3

Brand: ekwb Pages: 2

Brand: ICP DAS USA Pages: 26

ibaPADU-S-IT-16

Brand: IBA Pages: 80

Brand: Devolo Pages: 24

Brand: Olivella Modular Pages: 19

Brand: Costar Pages: 14

Network Device PIP 444

Brand: Extron electronics Pages: 2

Magellan Systems

Brand: Paradox Pages: 40

Brand: iSMA CONTROLLI Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands