background image

9

1

3
5

2

4
6

9

8

7

7

7

The IW-RS436-07 supports either 2.5"/3.5" SAS/SATA disk bays x 36 or 2.5"/3.5" SAS/SATA 
disk bays x 24 and NVMe x 12 disk bays in specific areas. The control panel, USB I/O ports and 
indicators are located on the handles.

1.3.1   Front Panel Controls and Indicators

No.

Name

Color

Status

Description

1

System Reset Button

N/A

Press the button to activate system reset.

2

NMI Button

N/A

Press the button to activate user-defined function.

3

Power On/Off  

Button with LED

Green

Solid on

System is powered on.

N/A

Off

System is off.

4

Chassis ID  

Button with LED

Blue

Solid on

Press the button to activate system identification.

5

Hard Disk LED

Amber

Blinking

System HDD accessing.

6

System Fail LED

Amber

Solid on

System Status ( - , + ).

Green

Solid on

System Status ( + , - ).

7

LAN LED

(From top to bottom 

ranked LAN1-LAN4)

Green

Blinking

Link between system and network.

N/A

Off

No data transmission or receiving is occurring.

8

USB 3.0 Connector

N/A

USB devices connections.

9

NVMe 8 x 3.5" disk bays for faster hybrid storage performance.

Summary of Contents for IW-RS436-07




















Reviews: