Model : SK-Hybrid BP Series User’s Manual
PAGE 15 OF 16
Firmware Upgrade
The passive backplanes are planted Nuvoton M058 series MCUs for hosting disk LED
indication, Fan speed control and system fail alarm. These MCUs are preprogrammed in
manufacturing. In most cases, the MCUs are not required to reprogram unless there is issue
needed to fix.
How to upgrade firmware?
1. Require Nuvoton ARM Cortex-M0 programming tool. Nu-Me or Nu-Link and install
Nuvoton ICP Programming tool software.
2. Connect Nu-Link USB end to a host and the SWD end to Backplane ICE connector for
each MCU.
