iO User’s Guide
53
GETTING CONNECTED
,
Continued
T8728
Cable Input
Back
of TV
S VIDEO
VIDEO
VHF/UHF
L
AUDIO
R
VIDEO IN
1
3
120 VAC
60Hz 40W
120 VAC
60Hz 400W
BYPASS
0003B4287797
SABDQXTL
N0006246618
•
2
CONNECTING A NON-STEREO TV
Note:
Audio output from the
Digital Cable Box CABLE OUT
is monaural (non-stereo).
Required Cables
1
75 Coaxial Cable
Required Cables
1
Connect the coaxial cable from the wall outlet
to the Digital Cable Box’s CABLE IN jack.
Connect the Digital Cable Box’s TO TV/VCR
jack to the TV’s VHF/UHF IN (or RF IN) jack.
Connect one end of the AC power cord to the Digital Cable Box’s AC IN jack
and plug the other end into an AC outlet. Tune the TV to channel 3.
•
1
•
2
•
3
•
3
120 VAC
60Hz 40W
120 VAC
60Hz 400W
BYPASS
0003B4287797
SABDQXTL
N0006246618
Cable Input
Back of TV
T8729
S VIDEO
VIDEO
VHF/UHF
L
AUDIO
R
VIDEO IN
1
3
CONNECTING A STEREO TV
•
1
•
2
•
1
•
1
•
2
GETTING CONNECTED
1
S-Video Out
Connects to S-Video Input of TV or VCR (standard
definition).
2
Serial Number
Located in the lower left corner of the barcode.
Cablevision may ask for this number if your system
requires troubleshooting in the future.
3
Digital Audio Out
Connects to external digital inputs of surround-sound receiver
or other digital services.
4
Audio Out
Connects to left/right (L/R) audio inputs of a stereo receiver
or a TV with stereo sound.
5
Video Out
Connects to video input of TV or VCR.
6
Cable Out
Connects to cable input of TV or VCR.
7
Cable In
Connects to coaxial cable coming from the wall.
8
AC Outlet
Connects the power cord from another device such as a TV.
9
AC Power Input
Delivers power from the AC electrical outlet to the Digital
Cable Box using the cord provided.
120 VAC
60Hz 40W
120 VAC
60Hz 400W
BYPASS
0003B4287797
SABDQXTL
N0006246618
4 5
1
2 3
6
8
7
9
T10000
DIGITAL CABLE BOX BACK PANEL
52
iO User’s Guide
Connect the Digital Cable Box’s
LINE OUT (TV) AUDIO/VIDEO jacks
to the TV’s AUDIO/VIDEO IN jacks.
Note:
If your TV has an S-VIDEO jack:
For best picture quality, use an S-VIDEO
connection instead of the yellow video cable
on your combined A/V cable. Connect the
Digital Cable Box’s S-VIDEO OUT jack to the TV’s
S-VIDEO IN jack. S-VIDEO does not provide audio,
so audio cables must still be connected.
Connect one end of the AC power cord to the Digital Cable Box’s AC IN jack and plug
the other end into an AC outlet. Tune the TV to channel 3.
Set of Video/
Stereo Audio Cables
