Security Target
Version 1.1
2022-03-08
11
A detailed description of the TOE security features can be found in Section 6 (TOE Summary Specification).
2.3.1
Physical Boundary
The TOE includes the RPS and hardware models identified in Section 1.1 along with embedded firmware
v1.1.101 and corresponding documentation identified in Section 2.5 below.
An optional KVM cable set (not supplied with the TOE) is available as a separate purchase. The KVM cable
sets are built for the KVM connection to the PCs, providing better compatibility. Users can connect the
KVM and PCs using their own cable sets as long as the protocols are compatible but the vendor KVM cable
sets are recommended. The TOE was tested using the cable sets mentioned above and the following
adapters:
•
G2LU3CHD02 (USB-C to HDMI cable)
•
G2LU3CDP12 (USB-C to DP cable)
•
GDPHD4KA (Active DP-to-HDMI adapter)
•
GDPDVI4KA (Active DP-to-DVI adapter)
While the cable sets and adapters were supplied, they were not included in the evaluation because they
are considered part of the operational environment, along with the switched PCs, peripheral devices,
DisplayPort / HDMI / DVI-I monitors, USB keyboard, USB mouse, 3.5mm audio output (e.g. speakers) and
the host computers.
The following figure shows a representative TOE and its environment. In particular, it shows a four port,
single-head KVM and its connections.