Security Target
Version 1.1
2022-03-08
49
ITE IT66354
RAM
(6)
Remarks
(1)
The Embedded RAM may contain user data.
The Embedded RAM is cleared and user keyboard/mouse data is purged when the Secure KVM
powers-off or power-cycles, after switching ports, after a KVM reset (reboot), or a trigger of the
tamper-proof mechanism is detected.
(2)
The EEPROM does not contain user data. User settings, Secure KVM configuration, and audit records
are kept in EEPROM. The user settings and the Secure KVM configuration will be reset to KVM
default settings after a Reset to Factory Default. but the audit records remain unchanged after a
Reset to Factory Default, KVM reset (reboot), or power-cycle.
(3)
The Flash does not contain user data. Firmware code is stored in the Flash and cannot be updated or
rewritten. The firmware code remains unchanged after a Reset to Factory Default, KVM reset
(reboot), or power-cycle.
(4)
The EDID ROM does not contain user data. It is for PC Read EDID ROM. The EDID data will be cleared
after a KVM reset (reboot) or power-cycle.
(5)
(DisplayPort models only) The Flash does not contain user data. The firmware code for the HDMI to
DP Converter used is stored in the Flash, remaining unchanged after a Reset to Factory Default, KVM
reset (reboot), or power-cycle.
(6)
The switch
’
s internal EDID RAM does not contain user data. It is for PC Read EDID.
The EDID data will be cleared after a KVM reset (reboot) or power-cycle.
All components are powered by the Secure KVM only.