19
Operation
To Invoke Hotkey Mode (MAC Keyboard):
1. Press and hold
Clear
key for two seconds
2. Press and hold
Minus
key [
–
] key for one second
3. Release
Minus
key [
–
] and
within one second also release
Clear
key
The KVM will now enter Hotkey mode; indicated by blinking of the Caps Locks LED. On some MAC
keyboards, this LED is on the Caps Lock key itself.
Mac keyboard
Clear
Minus
NOTE:
If using the
Num Lock
and
Minus
key to invoke Hotkey mode is not optimal, refer to the next page for
instructions on changing the hotkey invocation keys to
Ctrl
and
F12
.
If the KVM did not enter Hotkey mode, repeat the above procedure keeping in mind
that this entire procedure must be done within five seconds.
