Technical Bulletin Paper Jam/
Ioline 600H or 28H
To remove paper jammed under a drive shaft segment:
1.
Turn off the Ioline 600H/28H, unplug data and power cables.
2.
Remove the rear stand mounting screws that fasten the plotter head to the stand
(Fig. 1).
3.
Position 2 people at each end of the machine.
4.
Have each person grab the end plate near the mounting screw, which you just
removed.
5.
Carefully, lift from the bottom and rotate the plotter head towards the front. The
machine should rest forward while on the stand (Fig. 1).
DO NOT LIFT THE MACHINE FROM THE REAR BY THE SILVER BAR! THIS WILL CAUSE
THE BAR TO BEND!
