8
9
Operate in 10 Easy Steps
Light it
Activate the WISPR™ by slowly pushing
the On/Off switch completely downward
until it clicks. The sound of the gas flow
changes to a mild ‘whisper’ confirming
your WISPR™ is heating up. This usually
happens on the first try; if not, depress the
switch again within 5 seconds.
An orange light will also become visible
beside the WISPR logo after a few
moments to confirm your WISPR™ is
heating up. The light will disappear once
the optimum controlled temperature
is reached. Note that during its normal
working cycle, the sound made by the
WISPR™ when “On” is cut in and out by the
thermostat.
Let it heat up
Allow at least 45 seconds for your WISPR™
to reach its controlled operational
temperature of 190°C before inhaling.
This doesn’t necessarily mean pipe
tobacco/plant material will be ready after
45 seconds. you may have to wait a little
longer.
Operate in 10 Easy Steps
Pack the chamber
Remove the filling chamber from the
WISPR™. Then place the ground material
into the filling chamber. Do not over pack,
otherwise airflow will be impeded.
Insert the filling chamber
After filling the chamber with your chosen
material place the filling chamber back
into your WISPR™ vaporiser.
Turn it on
Press On/Off switch downwards until you
can hear gas flow. (Mid position)
3
6
7
4
5
Summary of Contents for WISPR
