56K Internal PCI Modem
User’s Guide
Page 27
Modem was installed, but Windows 95/98 did not announce that it had found
new hardware.
Check that your modem is inserted all the way into the proper PCI slot. If it is installed
properly and not being detected change it to a different PCI slot. Also make sure that
PNP (Plug and Play) is set to AUTO in your BIOS setup.
The modem was installed properly in Windows 95/98 but still does not work. I
noticed a yellow exclamation mark on the modem name in the Device
Manager. How do I get it working?
The yellow exclamation mark means that the modem settings are conflicting with
another device or it is not install properly. If you need to change the resources follow this
instructions:
1. Click on the Start button > Settings > Control Panel and Double click on the
System icon.
2. Select the Device Manager and click on the plus sign next to "Modems”.
3. Double click on the device with the yellow exclamation mark on it.
4. Switch to the Resources tab.
5. Un-check "Use Automatic Settings" and choose a "Basic Configuration" from
the "Setting based on:" box that does not conflict with the other device or
double click on the specific resource name with the conflict and change it to a
different one.
6. When prompted to confirm changes click on OK. (Click on OK until you are out
of Device manager.)
7. Restart Windows.
