Software Updates
The Software Updates page identifies the Home Media Network Hard Drive software status and provides the ability to update the software for the Home
Media Network Hard Drive.
This software is protected by RSA BSAFE technology.
Manual update process: installing a device software update
1. In the table listing the current software installed on your Home Media Network Hard Drive, click
in the Action column to check for updates.
2. If an update is available, the Status column will state that a software update is available with a link. Download the update file to your local computer.
3. To retrieve the update, click
Add Software
.
4. In the
Add Software
pop-up window, if an update is available, there will be a link to download the appropriate update for your Home Media Network
Hard Drive. Click the link, follow the instructions on the download site page, and download the software update to your local computer.
5. Once downloaded, click
Browse
to select the update, and then click
Upload
to continue.
When the update is uploaded to the Home Media Network Hard Drive, the Status column will say
Ready to apply
.
6. Click
Apply all pending updates
to apply the update or updates. The software updates will be applied to your Home Media Network Hard Drive. If
you want to remove the update without applying changes, click
in the Action column.
The Home Media Network Hard Drive restarts once the software is installed. You should not power down the Home Media Network Hard Drive during the
installation process as this can damage the Home Media Network Hard Drive. If multiple updates are ready, all of them will be applied, requiring only
one reboot.
The Home Media Network Hard Drive will be temporarily inaccessible during the software update. Be sure no critical files are being
accessed.
66
Iomega® Home Media Network Hard Drive Cloud Edition
