Bluetooth
Once a Bluetooth adapter is detected, files can be uploaded to a configurable destination Share on the Iomega StorCenter ix4-200d from a Bluetooth device.
Configuring Bluetooth settings
1. To enable Bluetooth, click the switch on.
2. Once Bluetooth Transfer is enabled, check the
Enable security
checkbox to require Bluetooth users to supply a unique PIN that they have defined
before allowing them to transfer files to the destination Share on the Iomega StorCenter ix4-200d. If you have enabled security, you must define a
unique PIN number, which will be supplied by devices attempting to upload data using Bluetooth.
3. To set the destination Share, click
.
4. Click
Apply
to save your settings.
To change any Bluetooth settings, click
.
38
Iomega StorCenter ix4-200d