SNMP
SNMP (Simple Network Management Protocol) provides information about the state of the device to various management tools.
SNMP should be disabled unless you are specifically providing information to a management system that requires this information.
Configuring SNMP settings
1. To enable SNMP, click the switch on.
2. Enter a unique username and password to define the community.
3. Confirm your password.
4. Enter the IP address of the host in the
Trap Receivers
text box. To grant access to multiple receivers, list all of them in the text box, separating each
entry with a space.
5. Click
Apply
to save your settings.
To change any SNMP settings, click
.
Click
MIB file
to view or download a copy of the MIB (Management Information Base).
42
Iomega StorCenter ix4-200d
