Installation and Setup
First Time Startup
The first time you power up the ScreenPlay TV Link DX after connecting it to a TV, you will see a
setup wizard that enables you to select some basic settings. The setup wizard will not appear
again unless you reset the ScreenPlay TV Link DX to factory defaults.
1. If you have not already done so, connect the ScreenPlay TV Link DX to
your network
and
your TV
.
NOTE:
It doesn’t matter if you connect to your network first or your TV first.
2. Connect the included power supply to the
back
of the ScreenPlay TV Link DX.
3. Place the ScreenPlay TV Link DX on a stable surface and connect the power supply to an
uninterruptible power supply (UPS) or power outlet.
CAUTION!
Do not move the ScreenPlay TV Link DX while it is powered up to avoid damage
or data loss. Use only the included power supply.
NOTE:
The ScreenPlay TV Link DX will power up automatically when power is connected.
The indicator light will flash while the player powers up, then glow steadily.
4. Turn on your TV and change the input setting as needed to receive input from the
ScreenPlay TV Link DX.
5. When the ScreenPlay setup wizard appears on the TV screen, select your language and
press the Enter button on the remote control.
6. Select the aspect ratio needed for your TV screen (16:9 for wide-screen display or 4:3 for
full-screen).
7. Select ON for
Quick Start Mode
if you want the ScreenPlay TV Link DX to go into screen-
saving standby mode when you push the power button on either the remote control or the
player front panel. This will turn off video output without shutting down power to the
ScreenPlay TV Link DX.
If you select OFF for Quick Start Mode, the power buttons on the remote control and player
front panel will turn power to the ScreenPlay TV Link DX off and on.
NOTE:
Start up from standby mode is much faster than start up from complete power off.
If you want to use quick start mode, you can completely power down the ScreenPlay TV
Link DX using the
Shutdown option
from the Settings menu.
z
Installation Overview
z
Package Contents
z
Safety Information
z
Connectors and Indicators
z
Connecting to a TV
z
Connecting to a Network
z
First Time Startup
z
Power Down/Disconnect
z
Settings
Seite 16 von 65
27.06.2011
file:///C:/975415%20tvlinkdx-html-en/tvlinkdx-html-en/consolidated/printall.html