Connecting the StorCenter device
Connecting the StorCenter device
Connecting the StorCenter device
Connecting the StorCenter device
Check Package Contents
Initial Setup
Initial Configuration
Uninstalling the Storage Manager
Initial Configuration
Initial Configuration
Initial Configuration
Initial Configuration
This section provides step-by-step instructions for the initial setup of your device. If you are
configuring more than one StorCenter, completely configure one device before starting up the next
device.
1. The StorCenter Manager opens automatically to begin the Device Setup Wizard. Click Next
Next
Next
Next to
start the Device Setup.
If the StorCenter Manager software does not detect the storage device, the Hardware Setup
Wizard screen displays explaining how to properly connect the wiring. Once communication is
established, the Device Setup Wizard begins. Click Next
Next
Next
Next to start the Device Setup. Refer to
troubleshooting
for more information.
2. Identify your storage device on the network. Enter the following information and click Next
Next
Next
Next to
continue:
Storage Device Name
Storage Device Name
Storage Device Name
Storage Device Name—
—
—
—Enter a name to identify the StorCenter device on your
network. The device name should be unique and cannot include, spaces, or special
characters (such as " / \ [ ] : ; | & = , + * ? < >).
NOTE:
NOTE:
NOTE:
NOTE:
If you are configuring more than one StorCenter device at a time, configure
the device name before starting up the next device.
Storage Device Descriptive Name
Storage Device Descriptive Name
Storage Device Descriptive Name
Storage Device Descriptive Name—
—
—
—Enter a descriptive name for the StorCenter
device. This should be a more descriptive name.
3. Configure email notification. Enter the following information and click Next
Next
Next
Next to continue:
Notification Email Address
Notification Email Address
Notification Email Address
Notification Email Address—
—
—
—Enter one or more valid email addresses, separated by
spaces. When problems are detected by the system, the device will send notification
messages to all of the email addresses in this list.
Page 10 of 137
25-7-2010
http://www.iomega.com/support/manuals/ix-series/221-0809/en/consolidated/printall.h...