If a DHCP server is unavailable, the device could auto-assign an IP address or you can
manually configure the network settings. If you are comfortable with network technology,
uncheck Automatically configure all network settings
Automatically configure all network settings
Automatically configure all network settings
Automatically configure all network settings, which clears all checkboxes. When
the checkbox is empty, the text boxes below are enabled.
If you only want to configure your DNS Servers and WINS Servers, you can uncheck
Automatically configure all network settings
Automatically configure all network settings
Automatically configure all network settings
Automatically configure all network settings and check Automatically configure IP Address
Automatically configure IP Address
Automatically configure IP Address
Automatically configure IP Address.
If you choose to manually configure your network settings, supply the following
information:
DNS Servers
DNS Servers
DNS Servers
DNS Servers—
—
—
—the IP addresses of the DNS (Domain Name System) servers.
DNS is used for translating the domain name to IP addresses.
WINS Servers
WINS Servers
WINS Servers
WINS Servers—
—
—
—the IP addresses of the WINS server.
IP Address
IP Address
IP Address
IP Address—
—
—
—the static IP address of the Iomega StorCenter device.
An unused IP address from within the range used by the LAN should be used.
Subnet Mask
Subnet Mask
Subnet Mask
Subnet Mask—
—
—
—the subnet that the IP address belongs to.
The default value is 255.255.255.0.
Gateway
Gateway
Gateway
Gateway—
—
—
—the gateway IP address needs to be entered in this field.
Check Enable jumbo frame support
Enable jumbo frame support
Enable jumbo frame support
Enable jumbo frame support to enable jumbo frame support. Jumbo frame support
is useful for transferring large files, such as multimedia files, over a network. Jumbo frame
support increases transfer speed by placing large files in fewer data packets. It also
reduces the demand on the device hardware by having the CPU process more data in fewer
data packets.
Jumbo frame support should only be enabled if you are sure your network is jumbo-frame
compatible and all network devices have been configured to support jumbo frames. It is
recommended that you confirm all network interface cards (NICs) are configured to
support jumbo frames before enabling this feature.
Click Apply
Apply
Apply
Apply to save your changes.
NOTE:
NOTE:
NOTE:
NOTE:
If you change the network settings, the device restarts and you have to log back in.
|
top of page
|
Page 24 of 137
25-7-2010
http://www.iomega.com/support/manuals/ix-series/221-0809/en/consolidated/printall.h...