BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
10
SECTION 3
GETTING STARTED
FOLDING:
To fold your treadmill into the upright position, first be sure to set the elevation to 0 %
incline. The treadmill will not lock into the upright position if the treadmill is not at 0 %
incline.
Using both hands, lift the treadmill by the end caps at the rear of the treadmill and push it
up until the retaining shaft locks the treadmill into place.
UNFOLDING:
To unfold the treadmill from the upright position simply depress the unfolding pedal with
your right foot and guide the deck down with both hands. Make sure that you do not let
go until the deck is firmly on the floor.
MOVING THE TREADMILL
The treadmill will need to be locked in the upright position as illustrated above.
Grab the end caps with two hands and slowly pull the deck down towards
your body until the casters are able to roll freely. Keep the treadmill at that angle
until you are done with your move.