background image

 

 

BladeZ Corporation  • 20155 Ellipse  •  Foothill Ranch  •  CA  •  92610 

www.ebladez.com 

3

SECTION 1 

 

IMPORTANT SAFETY INSTRUCTIONS 

Read all instructions before using the treadmill. 
Notice: Consult your family physician or health care professional to develop a well 
planned exercise program to fit your health needs. If you encounter any pain or 
breathing discomfort while working out, 

STOP!

and consult a physician before 

continuing 

WARNING!

 

 
1.

 

It is wise to always unplug this appliance from the electrical outlet immediately 
after use. 

2.

 

Keep Children away from machine while in use. 

3.

 

Do not wear loose or dangling clothing while using the treadmill. 

4.

 

Maximum user weight of this treadmill is 300 lbs. 

5.

 

Keep  a  minimum  clearance  of  18”  on  each  side  and  24”  at  the  rear  of  the 
treadmill for safety. 

6.

 

It is mandatory that you unplug the treadmill prior to cleaning to reduce the risk 
of electric shock, serious burns, and the risk of injuries. 

7.

 

The treadmill should never be left unattended when in operation. Unplug the 
treadmill from the outlet when not in use or when servicing the treadmill. 

8.

 

Close supervision is necessary when this appliance is used by, on, or near 
children, invalids, or disabled persons. 

9.

 

Use this appliance only for its intended use as described in this manual. 
Do not use any attachment not recommended by the manufacturer. 

10.

 

Never operate this appliance if it has a damaged cord or plug, or if it is not 

working properly. Call your service center for any service concerns before taking 
your treadmill in for repair. 

11.

 

Keep the cord away from heated surfaces. 

12.

 

Never drop or insert any object into any opening. 

13.

 

Do not use outdoors. 

14.

 

Do not operate where aerosol (spray) products are being used or where oxygen is 
being administered. 

15.

 

To disconnect, turn all controls to the off position, then remove plug from outlet. 

16.

 

Connect this appliance to a properly grounded outlet only. 

17.

 

This appliance is intended for household use only. 

 

SAVE THESE INSTRUCTIONS 

Summary of Contents for 1807T-ME



























Reviews: