3
•
Press
Tempo -/+
to change the speed of the Rhythm.
•
Press the
Rhythm Buttons
to change the Rhythm without stopping playback. Once
the current measure is done playing, there will be four "clicks" to count you in, then
the new Rhythm will begin playing.
•
Press
Lesson
to mute the drums' sounds from the Rhythm so you can play along.
The lights below the drums will light up to prompt you when to hit each drum, or you
can also make up your own drum parts. (The drums will sound even when you hit
them even if the original drum part is still playing, allowing you to play your own
patterns over the original part.)
4.
Press
Stop
to stop the Rhythm.
Features
2
3
5 6
7
8 9
10
4
4
4
4
1
1.
Headphones:
For quieter playing, connect your headphones to Discover Drums USB
here.
2.
USB Port:
Use the standard USB cable (included) to connect this USB port to your
computer. The computer's USB port provides ample power to Discover Drums USB. This
connection is also used to send and receive MIDI data to and from your computer.
You can also power Discover Drums USB by connecting this USB port to a power outlet
using a standard USB charger (included).
3.
Power Switch:
Turns Discover Drums USB on or off.
4.
Pads:
Strike the pads with drumsticks to play their sounds.
5.
Volume -/+:
Press these buttons to adjust the master volume.
6.
Kit -/+:
Press these buttons to change the Kit (a set of drum sounds).
7.
Rhythm Buttons:
Press these buttons to select the Rhythm. Use the numbered buttons
(1-7) to select a Rhythm by its two-digit number (displayed above the pads), or use the -
/+ buttons to move through the Rhythm numbers one at a time. You can play the demo
Rhythm by pressing
Demo
.
8.
Tempo -/+:
Press these buttons to adjust the tempo of the Rhythm.
9.
Start / Stop:
Plays / stops the currently selected Rhythm.
10.
Lesson:
Press to turn the drum part of a Rhythm on or off. This is useful if you are trying
to figure out the drum pattern by itself. (The lights under each pad will still flash to tell you
which pads to hit.)
