21
Notes
• If you change your mind or select the wrong Pattern, you can select a new Pattern number at any time before
the next Pattern begins.
• If you press STOP before the next Pattern begins playing, the IDM01 will stop and remain on the currently
selected Pattern.
• Shortcut: To choose the next higher-numbered Pattern than the one in the display, press the INC button (if 49 is
the current Pattern, pressing INC calls up Pattern 00). To choose the next lower-numbered Pattern than the one
in the display, press the DEC button (if 00 is the current Pattern, pressing DEC calls up Pattern 49).
• If you select a new Pattern and press PLAY, it will immediately start playing the next Pattern.
3.1H Select Fill Patterns in Perform (Playback) Mode
Fill Patterns are the key to creating expressive drum parts. However, Fill is a sophisticated
feature that requires some explanation.
Remember that Fills are always the same length, and use the same Drum Set, as the
associated Main Pattern. This lets you "drop in" a Fill at any time. As soon as you press the
FILL button, the Fill takes over from the Main Pattern and starts playing until the end of the Fill.
Generally, Fills are transitional Patterns.
Example:
Suppose an 8-beat A Main Pattern is
playing and you press the FILL button on beat 4. The A Fill Pattern will play the last 4 beats
and then automatically transition into the B Main Pattern. Conversely, if B Main is playing and
you press Fill, after B Fill has played, the IDM01 will transition to the A Main Pattern. You can
select the Fill at any time the Main Pattern is playing.
However, Fills do not
have
to be transitional Patterns. If you press
the FILL button (or
footswitch) before the Fill has finished playing and hold it down until after the Fill has played
(i.e.,
past the downbeat of the next Pattern), the IDM01 will return to the original Main Pattern.
Example:
Suppose an 8-beat A Main Pattern is playing and you press the FILL button on beat
4 but hold it down past beat 8. The A Fill Pattern will play the last 4 beats, then the IDM01 will
return to the A Main Pattern.
Fills cannot start on the downbeat since a Fill, by definition, starts at some point into the Main
Pattern. However, anything you record on the Fill downbeat will play on the first downbeat
following the Fill
(i.e.,
the downbeat of the next Pattern). To show why this is a useful feature,
consider that when coming out of a fill, you'll often want to hit something like a cymbal crash on
the downbeat of the next Pattern yet not have that crash repeat every time the Pattern plays.
This way of handling Fills lets the downbeat cymbal crash be part of the Fill instead of the
Pattern.
A footswitch plugged into the Count/A/B/Fill jack duplicates the FILL button function when
playing Patterns in Perform mode.
Background
This way of handling Patterns explains the logic behind having A, B, and Fill Patterns. In typical
pop tunes, A would be the verse and B the chorus. A Fill provides the Fill that transitions from verse to chorus,
and B Fill provides the Fill that transitions from chorus to verse. Thus, one of the numbered Patterns may be all
you need to put together a tune.
This structure makes it possible to put together songs in minutes using the Preset Patterns. It also makes it easy
to play drum parts live. For example, if there's a solo happening over the A Main Pattern, you can keep the
