37
5.1G Change Song Tempo as the IDM01 Plays
To change the Song tempo as it plays, press the TEMPO/PAGE UP button to increase the
tempo, and the TEMPO/PAGE DOWN button to decrease the tempo.
5.2 REAL TIME SONG CREATION
To create a Song in real time (this assumes an empty song):
1.
(Optional) In Pattern mode, select the Pattern you want for the first Song step.
2.
Select Song mode and the desired Song number.
3.
Select Compose mode. The display will show
STEP 01
and the contents of the step, which is
currently
END
(if the first step says
END
, that indicates that the Song is empty since it contains no data.
If the first step shows a
PATT
ern number, then the Song is not empty).
4.
If you did not perform step (1) above, enter the desired Pattern for step 1 (Preset or User, A or B, A
Fill or B Fill).
5.
Press PLAY. If you performed step (1) above, the Pattern you selected will begin playing. Otherwise,
the Pattern specified in step (4) above will start playing.
6.
If you enter a new Pattern number (Preset or User, A or B) while the first Pattern is playing, the new
Pattern will begin playing after the first Pattern has finished and be stored as another Song step in the
Song. If you let the original Pattern keep playing, it will add a new Song step with its Pattern number
every time it repeats.
7.
In addition to selecting different Patterns, you can press FILL at any time. The IDM01 will remember
where you pressed FILL.
As in Pattern mode, pressing FILL will automatically transition to the B Pattern if the A Pattern is
currently playing (and vice versa), or will continue playing the same Pattern if the FILL button is held
past the end of the Fill.
A Fill can transition into any Pattern number, A or B, by specifying the Pattern before the end of the Fill
and releasing FILL before the Fill has finished playing. If you hold FILL past the end of the Fill, the
associated Main Pattern will continue playing and any Pattern you may have previously specified for
the next Step will be forgotten.
When recording a Song in Compose mode, the Count/A/B/Fill footswitch duplicates the FILL button
function.
5.2A Real Time Song Editing
If you have already recorded material in a Song, pressing PLAY while in Compose mode will
not allow recording until after the last Song step (as indicated by the display switching from
PLAYING
to
RECORDING
). However, you can overdub Fills at any time, and these will be
recorded in the Song where played. Under these conditions, holding FILL past the downbeat
doesn't make any difference; the Patterns used in Song steps are not altered.