44
6.5 PAGE 5: ACCEPT EXTERNAL CLOCK DATA (CLOCK IN)
PAGE
CLOCK IN
ON
SETUPMIDI
PERFORM
The display shows
CLOCK IN
. To have the IDM01 recognize clock (timing) messages present
at its MIDI input, use the INC/DEC buttons to select
ON
(if no clock messages are present, the
IDM01 will follow its internal clock tempo). Select
OFF
to have the IDM01 ignore clock
messages and follow its internal clock tempo regardless of what timing data appears at the
MIDI in.
When using the IDM01 as an expander module, set
CLOCK IN
to
OFF
so that timing signals
don't start playing a Pattern.
Background
The IDM01 can have its tempo set by another device (this overrides the internal clock tempo) if:
• The external device (sequencer, drum machine, etc.) generates MIDI timing signals.
• These signals go from the external device's MIDI out to the IDM01's MIDI in.
•
CLOCK IN
is
ON
.
6.6 PAGE 6: SEND CLOCK DATA TO OTHER DEVICES (CLOCKOUT)
PAGE
CLOCKOUT
ON
SETUPMIDI
PERFORM
The display shows
CLOCKOUT
. To have the IDM01 generate timing data at its MIDI out, use
the INC/DEC buttons to select
ON
. Select
OFF
to inhibit MIDI timing signals from appearing at
the MIDI out jack.
