QUICK SETUP GUIDE
1.
Make sure all items listed on the front of this guide are included in the box.
2.
READ SAFETY INSTRUCTIONS BEFORE USING THE PRODUCT
3.
Study this setup diagram.
4.
Place the amplifier in an appropriate position for operation.
5.
Make sure all devices are turned off and all volume/gain knobs are set to “0”.
6.
Plug in the amplifier into an appropriate power source.
7.
Always connect headphones and other audio output devices after the
amplifier power is on.
8.
Connect and turn on everything in the following order:
•
Connect the guitar to the amplifier
•
Turn on the amplifier
•
last, connect any other optional audio output devices to the amplifier
9.
When turning off, always reverse this operation by:
•
Disconnect any other optional audio output devices to the amplifier
•
Turn off the amplifier
•
Disconnect the guitar
10. Go to
http://www.ion-audio.com
for product registration.
TO INPUT
TO OUTPUT
TO POWER
Rear View
Front View
