ION TREBLE LP, Quick Start Manual

5 

Features 

 
1.

Platter: 

Place your record here, securing 

it to the platter with the plastic cap. 
(Loosen the cap by turning it clockwise; 
turn it counterclockwise to tighten it.) 

2.

Tonearm:

 The fixed tonearm can be 

raised and lowered by hand, or by 
pressing the raise / lower lever.  

3.

Arm Clip: 

This specially designed arm 

clip secures the tonearm while at rest or 
when not in use. 

4.

Raise / Lower Lever: 

Raises and lowers 

the tonearm. 

5.

Bluetooth LED:

 This LED blinks blue 

when pairing with a Bluetooth device. 
Once fully paired, the LED will be lit solid 
blue. When Treble LP is power on and 
Bluetooth is inactive, the LED will be lit 
red. 

6.

Bluetooth Button:

 Press this button to 

start Bluetooth pairing.  If after 5 minutes 
no Bluetooth speaker can be found to 
pair with, the Bluetooth transmitter will 
become inactive and the 

Bluetooth LED

will be lit red.  When currently connected 
to a Bluetooth device, press this button 
to disconnect. 

Note

: The Treble LP needs to be 

powered on for five seconds before it is 
capable of Bluetooth Pairing.  

7.

Power / 33/45 Switch: 

This switch 

powers Treble LP on and off, and 
controls the RPM of the turntable platter.

8.

Volume:

 Adjust this to control the audio 

output level. 

9.

Audio Out:

 Use a standard 1/8" (3.5 mm) 

stereo auxiliary cable to connect this 
output to an optional external speaker 
system for listening to your vinyl 
playback. 

10.

Power Input:

 If you prefer to power 

Treble LP via wall power instead of the 
internal battery, you can connect the 
included power adapter to this input, 
then connect the adapter to a wall outlet. 

11.

Battery Compartment:

 In this 

compartment is the Lithium Ion battery 
that powers the Treble LP when the 
power adapter is unplugged. The battery 
will charge when the power adapter is 
plugged into a wall outlet.

2

3

1

4

5

6

7

8

9

10

11