IOne Digital Icops I, Product Manual

11

Settings

and

Instructions

7-2. How to enroll & delete ID card numbers

10

Settings

and

Instructions

7

Settings and Instructions

7-1 How to select mortise direction : Selection of left hand or right hand

①

Close key cover.

②

Open battery cover and press both

Card

and 

P/W button

simultaneously

for two seconds.

③

The direction of locking device will be
set in the opposite direction with a
beep sound.

④

Manual open/close lever must also be
adjusted accordingly. 

CARD
button

P/W button

* It is matter that you must note on installation.
* The lock is produced to be installed on the left-side. In case the door is 

placed for the right-side installation of the door, be sure to change the 
mortise direction to the right before programming other functions. 

If you do setting work, please do it in a Manual mode

How to enroll/re-set

①

Open key cover

②

Open battery cover and press Card
button.

③

LED displays "P 00" with a beep 
sound

④

Contact key card on indication window
to be enrolled (additional cards can be
enrolled following the process 

①

~ 

④

.

⑤

The mode is complete after beep
sound (a programming must be
performed within 8 seconds of time
otherwise, it is canceled.)

CARD
button

How to
enroll