Getting Ready
Locate a level surface on which to place Ionic Pro
Turbo
®
ionic air purifier and a grounded 120v
outlet. (Follow warnings described in the
“SAFETY INSTRUCTIONS”
section of this manual.) Position
your Ionic Pro
Turbo
®
ionic air purifier at least one foot (12 inches) from the wall. Plug in the unit.
You are now ready to turn on your Ionic Pro
Turbo
®
ionic air purifier!
1. ON/OFF Button
A LOW
–output indication light (LOW)
B MEDIUM
–output indication light (MED)
C
HIGH
–output indication light (HI)
D CLEAN
–indication light (CLEAN)
2. CLEAN –
wire cleaning mechanism
3. OPEN
–main door button
4. CLEAN
–Indication light
OpErATiNG THE iONiC prO
TurBO
®
Air puriFiEr
Controls/Settings
1. ON/OFF BUTTON
Turns unit on and off.
A LOW
–This is the most cost-effective setting. Ideal for medium sized rooms, where windows
& doors rarely open.
B MED
–Recommended for medium to large-sized rooms.
C HI –
This maximum output setting is recommended for medium to large rooms and/or areas
exposed to heavy dust.
D CLEAN
–This red light goes on when your Ionic Pro
Turbo
®
ionic air purifier needs to be
cleaned, or the unit is experiencing some other
problem. See
“TROUBLE-SHOOTING”
section.
Selecting Settings
1. Set up the Ionic Pro
Turbo
®
ionic air purifier as
described in
“Getting Ready”
.
2. Press the ON/OFF button to activate your
ionic air purifier and get ready to enjoy clean,
ionized air.
3. The Ionic Pro
Turbo
®
ionic air purifier
automatically defaults to the HI (high/maximum
output) setting whenever the unit is turned on.
4. Just press the ON/OFF button one more time to
select the MED (medium) output setting and press
the ON/OFF button once again if you wish to select
the LOW output setting.
5. Press the ON/OFF button a fourth time to turn
the unit off.
6. The indicator LEDs light up to indicate your current
setting (LOW, MED, HI).
Clean Light:
The red CLEAN light will turn on and the unit will shut
down if cleaning is overdue or AC input is unstable.
The Ionic Pro
Turbo
®
ionic air purifier’s collection blades
must be cleaned after every month of use and the
internal ionizing wires must be cleaned at the same
time. (See
“CLEANING & MAINTENANCE”
for full
directions.) Once the collection blades are properly
cleaned, normal operation should resume.
OpErATiNG THE iONiC prO
TurBO
®
Air puriFiEr
7
6
