07
08
Emergency Starter
The Emergency Starter can be active either by long pressing the start
button or with the “Ionic Red Batteries” APP.
When activating by long pressing the start button, the LED lights will
start blinking rapidly, indicating cables are active and ready to start the
engine.
When activating by the APP, open the APP, “Ionic Red Batteries”, and
press on the circular “Start” button. The circular button will turn green
that will allow you to start your engine. The LED lights on the
Emergency Start will start blinking rapidly, indicating cables are active
and ready to start the engine.
The Emergency Start will stay active until a discharge voltage of 13.6V is
reached. When reactivating the unit again by repressing the circular
button the Emergency Start will stay ON until the Emergency Start
battery is fully discharged at ~10V. An engine start attempt can be made
during any time when the unit is active.
Any time a charging system is charging, such as from vehicle alternator
the Emergency Start will turn ON to receive a charge.
The Emergency Starter disconnects itself automatically from the vehicle
battery system when the battery voltage drops below 13.6V, keeping the
Emergency Starter at full charge and to prevent the Emergency Start
from discharging.
If Emergency Starter not used for 3 months,
BlueTooth activations is not possible and would need to be reactivated
by manually long press on the unit or with a charging sytem.
Output Voltage: 9V to 1
5
V
Peak capacity 4.5Ah or 18,000mAh equiv.
Dimensions: 6.5in x 3.5in x 1.8in (165mm x 89mm x 44mm)
Weight: 1.7lbs
Start Current: 800A
Peak Current: 1
,
600A
Cycle life: 2
,
000 at 80% Depth of Discharge (DOD)
Application Temperature: -4F to +140F (-20C to 60C). Cell performance
may degrade at low temperature.
Installation Guide :
TECHNICAL SPECIFICATIONS
177.6mm
46mm
90.6mm
Fig. 2 APP Emergency Start - ON
Fig. 1 APP Emergency Start - OFF
TECHNICAL SPECIFICATIONS
