Annual Servicing
54
Annual Servicing
Servicing described in the manual is only to be performed by a qualified person.
Installation
-
Safety
Inspection
Reach &
W
ash
™
systems are installed in accordance with BS EN 12195 Load Restraint
Regul
a
tions, the Road
T
raffic
Act 1986, the Road
V
ehicle (construction & use) Regulations
and to FMVSS
-
208 crash test
specification.
It is of upmost importance that
Annual Safety Inspections (ASI
’
s) a
re carried out on time, the
in
spection covers the integrity of the component chassis, welded joints, corrosion of
component chassis, mounting brackets, fasteners and torque
settings.
On completion a certificate will be issued, a copy of the certificate may be required by your
motor insurance compan
y
.
Servicing
The use of waterfed pole
systems is becoming more common
place, so the di
f
ference
between good contractors and poor
contractors is highlighted by the quality of the system and
the water produced.
The high quality of water produced by the Reach &
W
ash
™
system can
only be ensured by presenting the machine for an annual service.
Thermopure
™
Servicing
Thermo
-
pure
™
systems
require annual servicing of the heating components, this is vital to
ensure the safety of the machine as well as to guard against the possibility of harmful
Bacteria developing within the system.
Y
our
Resonsibility
Presenting
The Reach &
W
ash
™
system for its annual service is the customers
responsibilit
y
, proper servicing will ensure many years of service, while providing pure water
of the highest quality will ensure that your customers receive the highest quality window
cleaning service enhanc
ing your reputation.
Maintenance
The use of waterfed poles requires little skill but can be physically demanding unless the
correct techniques are employed.
W
aterfed poles in a poor state of repair will require more
physical e
f
fort to operate.
Regular
replacement of filters ensures both the quality of water produced for cleaning and the
e
f
fective control of the L
egionella bacteria. Manufacturers will specify the appropriate intervals
for filter replacement, generally smaller filters shall require more
frequent replacement than
larger filters.
V
ehicle mounted water treatment/delivery systems must be installed in accordance with the
r
e
quirements or the Road
T
raffic, the Road
V
ehicle Construction and Use Regulations and BS
EN: 12195 Load Restraint Regulat
ions. In order to ensure that the installation continues to
meet these requirements an annual inspection should be carried out by a competent per
son
and any remedial work signa
led by the inspection should be carried out in a timely mano
r
.
Summary of Contents for Zero PPB
