31
31
support@ionodes.com | www.ionodes.com | 450-696-1060
o
Frame rate
–
Select the frame rate (expressed in fps)
o
Rate control
–
Select between Fixed Quality or Variable Rate
o
Quality
–
Set the image quality (expressed as a percentage from the maximum)
o
Multipart Compliant
- informs the client to expect several parts (frames) in response to a
GET request for the MJPEG stream.
o
URL
–
displays the URL that can be used for direct streaming from this specific profile.
o
Multicast Assignation
–
This section will only appear if the Global Multicast setting is enabled.
It allows you to manually configure the Multicast IP & Port for the specific outgoing stream;
when the automatic setting is enabled the encoder will automatically assign the Multicast
IP & Port based on the global range defined under
Configuration > Network > Multicast
.
Note:
When in manual assignation mode, the multicast settings for a specific stream will override
the global settings.
7.3.5
Configuration/Microphone
Under the
Configuration
section, select the
Microphone
tab to perform the following operations:
•
Enable or disable the onboard dual microphone system.
•
Control the audio gain.
•
Configure the compression for the audio (type/ channels/ bitrate)
