![background image](http://html1.mh-extra.com/html/ionogen/ionopure-purity/ionopure-purity_instructions-manual_2087639004.webp)
Product Information
Product Name
Purity Air-Sanitizing System
Model No
Model 001
Control Mode
Mechanical Version
Rated Voltage
120V
Rated Frequency
60 Hz
Rated Power
28W
Tank Capacity
4.5 L
Maximum Atomization
250mL/h
Product Size (L, W, H)
180 x 160 x 370mm
Troubleshooting
Problem
Cause
Solution
Sanitizer leaking
out of unit
Floating rod may be
stuck in the floating rod
bracket.
Move the floating rod
up and down to help it
move freely inside the
floating rod bracket.
Light on but no fog
Base sanitizer level is too
high
Remove some sanitizer
from base and restart
unit
Less spray
Mist disc with more scale
or excessive impurities in
sanitizer
Clean mist disc or replace
sanitizer
Sanitizer does not
reach base
Tank cover is dirty or tank
is not correctly installed
Clean tank cover and
install tank correctly
Sanitizer in tank exceeds
the maximum water level
Reduce sanitizer in tank
to the highest level