![background image](http://html1.mh-extra.com/html/ionogen/ionopure-purity/ionopure-purity_instructions-manual_2087639005.webp)
Safety Information
Although very rare, in the event eye irritation occurs when using this product,
simply ensure the unit is on low and move the unit farther away from the
affected person. If irritation continues, add 50/50 mixture of cold water to
ionopure Air Sanitizer.
Avoid close, prolonged exposure to sensitive electronics or untreated metals.
DO NOT
use on high setting near optical smoke detectors, as they can mistake
the mist for smoke and cause smoke alarms to go off. Setting the unit on low is
sufficient to achieve proper sanitization.
DO NOT
run unit in close proximity to clothing, fabrics, upholstery, carpet, etc.
for extended periods, as discoloration may occur in some materials.
To avoid electric shock,
DO NOT
unplug product if hands are wet.
DO NOT
disassemble, repair or alter product.
When product is in use,
DO NOT
touch mist disc with hands.
Make sure power cord is not damaged, knotted, clamped or pressed against
heavy objects (this could cause electrical shock, short circuit or fire).
DO NOT
replace power cord without authorization. Unplug product
immediately if there are any operational problems and contact manufacturer.
If power supply wiring is damaged, it must be replaced by a professional.
DO NOT
remove tank from base when product is in use.
DO NOT
touch sanitizer or base parts when product is in use as this is an
electrical device filled with solution. Avoid spilling solution.
This product is only for use indoors.
Unplug product during thunderstorms or if not in use for long periods of time.
DO NOT
turn product over during operation. Sanitizer in base could burn the
internal components.
To avoid accidents,
DO NOT
allow children to use or operate product. Children
should be supervised near the unit at all times.
Unplug product when filling with water and cleaning.