12
© by IONTO-COMED
Fault Finding and Solutions
Fault Cause Solution
Automatic adjustment of
the bed doesn’t function.
Voltage supply cable not
connected correctly.
Check connection of the
mains power cable. Mains
power plug must be firmly
inserted.
Treatment bed does not
move to the saved
treatment position.
Treatment bed not
initialized.
Initialize treatment bed (see
page 6) and afterwards
recall saved treatment
position. If needed
treatment position has to be
resaved.
Initialization
aborted.
Initialize again the treatment
bed (see page 6).
Seat heating doesn’t
function.
ON key is not pressed.
Press ON key.
In the event of any other problem arising which is not dealt with above, please
contact our customer service department (telephone number on the rear page).
Technical Data
Article number:
8460
Operating voltage:
230 V~ / 50-60 Hz
Power:
Xtension 4 (without Memory function): 180 W
Xtension 4S (with Memory function): 180 W
Xtension 5S (with Memory function): 180 W
Heating: 80
W
Maximum weight on seat: 170 kg
Dimensions:
Width with arm rests: 820 mm
Length:
1740 – 2130 mm
Seat height:
530 – 980 mm
Seat depth:
460 – 560 mm
Weight: 85
kg
