© by IONTO-COMED
7
)
Push the headrest forward or backward into the desired position.
3. Backrest adjustment:
The tilting angle of the backrest (2) can be adjusted.
)
Press the left button in the first row on the manual control (9) to lift the back
rest up front.
)
Press the right button in the first row on the manual control (9) to lift the back
rest back down.
4. Seat height adjustment:
The whole bed can be raised or lowered to the required height.
)
Press the left key in the 2nd row (12) on the manual control to raise the bed.
)
Press the right key in the 2nd row (12) on the manual control to lower the bed.
5. Seat adjustment:
The tilt angle of the whole bed can be adjusted (4).
)
Press the left key in the 3rd row (10) on the manual control to tilt the seat
angle backwards.
)
Press the right key in the 3rd row on the manual control (10) to tilt the seat
angle forward.
6. Legrest adjustment:
The legrest (5) can be adjusted independently of seat and backrest.
)
Press the left key in the 4th row (11) on the manual control to raise the legrest.
)
Press the right key in the 4th row (11) on the manual control to lower the
legrest.
7. Footrest adjustment:
The footrest (6) can be extended.
Note
The footrest must be retracted when moving the bed into the entry seat
height (lowest position).
)
Pull out footrest until the desired position is reached.
)
Push footrest back in.
Save Treatment Position (IONTO-Comfort Xtension 4S only)
1. To save the treatment position:
)
Adjust the couch to the required position.
)
Press the memory key S (14).
)
Press the programming key 1, 2 or 3 (13) after a maximum of 1 second.
An acoustic tone will sound.
)
After a maximum of 1 second press the memory key S again.
Two acoustic tones will sound.
)
Release pressure on the memory key S.
The treatment position is saved.
Note
A new treatment position can replace a previously saved position.
2. Call-up a saved treatment position:
)
Press the required program key 1, 2 or 3 (13).
Hold the key down until the bed has reached the programmed position.
