© by IONTO-COMED
9
Operation IONTO-COMFORT XTENSION 5S (5-MOTORS)
Caution!
Risk of pinching!
The arms of the client must remain on the couch during adjustment of the
reclining position.
Note
Do not allow that oil or any care products come in contact with the
upholstery because this can damage it.
We recommend the use of an upholstery protection, e.g. a towelling
cover.
If oil comes in contact with the upholstery, remove immediately.
Set Reclining Position
1. Armrest adjustment:
Caution!
Danger of injury!
Do not allow the armrests to fall downwards.
Both Armrests (3) can be folded downward.
)
Raise the armrest lightly.
)
Fold the armrest downwards.
Raise armrests:
)
Lift the armrest.
)
Fold the armrests back forward again.
2. Headrest adjustment:
The headrest (1) is removable and can be tilted to the front or back.
)
Pull the headrest up vertically to the desired position.
)
Push the headrest forward or backward into the desired position.
3. Backrest adjustment:
The tilting angle of the backrest (2) can be adjusted.
)
Press the left button in the first row on the manual control (9) to lift the back
rest up front.
)
Press the right button in the first row on the manual control (9) to lift the back
rest back down.
4. Seat height adjustment:
The whole bed can be raised or lowered to the required height.
)
Press the left key in the 2nd row (12) on the manual control to raise the bed.
)
Press the right key in the 2nd row (12) on the manual control to lower the bed.
5. Seat adjustment:
The tilt angle of the whole bed can be adjusted both forwards and backwards (4).
)
Press the left key in the 3rd row (10) on the manual control to tilt the seat
angle backwards.
)
Press the right key in the 3rd row on the manual control (10) to tilt the seat
angle forward.
