ioSafe NAS User's Guide
Based Synology on DSM 5.0
20
Reinstall IoSafe NAS
If you want to reinstall your IoSafe NAS without losing its data, you can use the
RESET
button on the back panel.
To reinstall IoSafe NAS:
1
Press and hold the
RESET
button for about 4 seconds until the IoSafe NAS emits a beep sound.
2
Within the next 10 seconds, press and hold
RESET
button for about 4 seconds until the IoSafe NAS emits a
beep sound.
3
Follow the installation instructions in the
Quick Installation Guide
for your model available at IoSafe’s Support
Section to set up the ioSafe NAS.
Important:
The data saved on the IoSafe NAS will not be erased during the reinstallation. However, for security
reason, we strongly recommend that you back up the data first.
Enable SNMP Service
Go to
Control Panel
>
Terminal & SNMP
to enable SNMP service, which allows users to monitor IoSafe NAS
network flow with the network management software.
Enable Terminal Services
Go to
Control Panel
>
Terminal & SNMP
to enable Terminal service, which allows you to use Telnet or SSH to
log in to IoSafe NAS and modify its settings.
Important:
Use the Terminal service with caution. Improper manipulation or modification to IoSafe NAS may result in
system malfunction or data loss.
