10
14K160TH OTR Body & Air Compressor Manual # 99903184
NOTES:
1
WHEN TIGHTENING CLAMP, SPRING WILL BE COMPRESSED FROM A RELAXED 5.50" LENGTH TO A
COMPRESSED LENGTH OF 4.0".
2
USE DOUBLE NUTS ON THE BOTTOM TO AID INSTALLATION.
3
DRILL ALL CHASSIS FRAME HOLES THE SAME SIZE AS THE BOLTS USED.
4
LOCATE SHEAR PLATE 4" BEHIND FRONT UNDERBODY TOOLBOX.
5
WELD LONGSILL ON 3 SIDES ONLY.
6
FOR REAR END, USE GRADE #8 FASTENERS. TORQUE TO 375 FT-LB PLAIN; OR 280 FT-LB PLATED.
WHEN USING TORQUE WRENCH, ALWAYS HOLD THE BOLT AND APPLY TORQUE TO THE NUT. BOLTS
MAY PASS THROUGH FRAME IN EITHER DIRECTION.
93715891 PARTS LIST
ITEM
PART #
DESCRIPTION
QUANTITY
1.
76393799
MUD FLAP
2
2.
72063001
WASHER 1/4 WRT
8
3.
72060025
CAP SCR 5/16-18X1 HHGR5
8
4.
72063078
WASHER 5/16X1-1/2 OD
8
5.
72062109
NUT 5/16-18 LOCK
8
6.
60105107
SHEAR PLATE
2
7.
60108859
CLAMP PLATE (WAS 60105958)
6
8.
60125817
ROD 5/8-11 X 29 (WAS 60109298 - 22.5” ROD) 4
9.
72060151
CAP SCR 5/8-11X2 HHGR8
4
10.
72062233
NUT 5/8-11 HEX TOP LOCK GR8
4
11.
72063119
WASHER 5/8 FLAT HARD
16
12.
72062091
NUT 5/8-11 LOCK (WAS 8)
12
13.
70141935
SPRING
4
14.
72060207
CAP SCR 3/4-10X3 HHGR8
4
15.
72601862
NUT 3/4-10 HEX ZINC NYLOC GR8 (WAS
72062272)
4
16.
72063116
WASHER 3/4 FLAT HARD
8
REV. C 20070424
