DA440PBU:99900403:
6-1
19940729
When using the torque data in the charts above, the following rules should be observed.
1. Bolt manufacturers particular specifications should be consulted when provided.
2. Flat washers of equal strength must be used.
3. All torque measurements are given in foot-pounds. To convert to inch-pounds, multiply by 12.
4. Torque values specified are for bolts with residual oils or no special lubricants applied. If special
lubricants of high stress ability, such as Never-Seez compound graphite and oil, molybdenum disulphite,
collodial copper or white lead are applied, multiply the torque values in the charts by the factor .90. The use of
Loctite does not affect the torque values listed above.
5. Torque values for socket-head capscrews are the same as for Grade 8 capscrews.
FIGURE F-1. TORQUE DATA CHART
SECTION 6. REFERENCE
Summary of Contents for Diamond Air 80 PTO
