10/75
For keeping the IP, when using separate cables for Power and Internet, please use
silicon in the cable gland, around the cables, just as shown in the following picture,
indicated in yellow color.
b. It is recommended that the bottom of housing be set smooth and
closely flat with the surface.
c. When you mount the camera housing on the ceiling or wall, please use
the screws with the black rubber o-rings. Without the o-ring, the water
may seep into the machine.
Make sure there are no cables around the screws, and slowly lock the
four corners at the same time, applying equal force in every corner.
Do
not totally lock one screw at a time
; otherwise the closing might not be
equal in all four screws.
