- 11 -
If you select to connect to PC directly , please connect the RJ45 cable to 9820 MT after 1 minutes
as power on of the 9820 MT device . power hear the beep sound of 9820 MT DO NOT connect
the RJ45 as power ON
1.) Connect the power cable to 9820 MT and press the power switch to ON
2.) After 9820 MT power on for around 60 seconds , there is a short beep sound for 9820 MT
which means the system reboot successfully
3.) Then Connect the Ethernet cable (RJ45) to the 9820 MT to your PC.
6.) Execute the software IPEDIT.exe to get the IP as
192.168.1.169
7.) Please make sure the IP address of you PC is also 192.168.1.X / XX/XXX or you may not
log in the 9820 MT webage in 192.168.1.169
3.3 Software Installation
Please Go to
. The note with this online CD link comes with
the package .
IP Power Software:
IP Edit ( Required)
IP Power Center *(
For multiple IP Power devices control purpose )
1.) Select the IP Power 9820 MT