IPC APTA40008, Instruction Manual

English

- 11 -

GENERAL SAFETY RULES FOR 

THE USE

Warning

- Electrical connections must be carried out 

in respect of current legislation (

in complian-

ce with the provisions of the IEC 60364-1 

standard

) and in accordance with the manu-

facturer’s instructions.

Check that the installation and sockets are 

adequate for the maximum power of the 

appliance indicated on the rating plate (W).

- If in doubt, consult a qualified electrician.

The correct plug should be fitted by a quali-

fied electrician.

- The manufacturer declines all liability 

for damage to persons, animals or things 

caused by faulty or incorrect connection.

- Before connecting the equipment, check 

that the specification given on the rating plate 

corresponds to that of the mains electricity 

supply.

- If the equipment is connected via an ex-

tension, use cables with an adequate cross 

section, never less than 1,5 mmq.

- The electrical safety of the equipment is 

guaranteed  only  when  correctly  and  effi-

ciently earthed as specified in current elec-

trical safety legislation (

in compliance with 

the provisions of the IEC 60364-1 standard

).

This fundamental safety requisite should 

be verified. If in doubt, ask a professionally 

qualified  electrician  to  check  the  system 

thoroughly.

It is recommended that the electric supply 

to this machine should include a residual 

current device that will interrupt the supply 

if the leakage current to earth exceeds 30 

mA for 30 ms or a device that will prove the 

earth circuit.

TRANSLATION OF ORIGINAL INSTRUCTIONS

This  text has been carefully checked. Should any printing 

errors  be  noted,  these  should  be  communicated  to  the 

manufacturer.

With the aim of improving the product, we reserve the right 

to update this publication without notice. 

This booklet may not be reproduced in any form without 

the manufacturer’s authorisation.

Hazard levels

Warning

Identifies a risk situation which could lead to serious injury.

FOREWORD

Warning

This publication must be read before setting up, starting and 

using the equipment. It is an integral part of the product itself.

Read the warnings and instructions contained in this booklet 

carefully. They provide important information on the 

safe use

and 

maintenance

 of the equipment. Pay particular attention to 

general safety instructions.

Keep this booklet in a safe place for future consultation. 

These equipment are constructed according to current safety 

standards and regulations.

The contents of this booklet should be brought to the attention 

of the user.

CLASSIFICATION

The user of this appliance must respect the specified operating 

conditions with particular regard to the following classification:

This appliance equipped with electric motor is classified as a 

class I

 appliance in terms of protection against electric shock.

The equipment is adjusted in the factory and all safety devices 

are sealed. 

Their adjustment must on no account be altered

.

The equipment must always be used on solid flat ground.

Failure to comply with this could constitute a source of danger.

The equipment must not be used in corrosive or potentially 

explosive atmospheres (vapours or gas).

!

!

!