English
- 23 -
classified as drinking water.
Warning
Do not connect the machine to a drinking water container.
Danger
Never suck up liquids containing solvents or acids in the pure
state, for example petrol, paint solvents or diesel. The spray mist
from the lance is highly inflammable, explosive and poisonous.
Failure to respect the above absolves the manufacturer
of all liability and represents negligent use of the product.
Check that the pressure and
quantity of the water supplied
by the mains are sufficient for
the cleaner to work properly:
200 to 400 kPa (29 to 58 PSI).
Maximum temperature of
feeding water 50°C (122°F).
Connect the high pressure
hose to the cleaner (fig. 5C)
and to the lance (fig. 6).
Danger
The cleaner must operate
with clean water. Dirty or
sandy water, corrosive che
-
micals and solvents can
cause severe damage to
the cleaner.
Information
R e s p e c t t h e i n-
structions provided by
the water utility company.
Current regulations specify
that the appliance may not
be connected to the drinking
water supply unless a suitable
system separator is fitted.
Use a suitable EN 12729 type
BA system separator.
Water passing through a
system separator is no longer
COMMAND AND CONTROL DEVICES
Warning
Before connecting the machine to the water supply and to the
power mains, it is essential to know the function of the cleaner's
FIG. 3
FIG. 6
FIG. 5
command and control devices.
SAFETY DEVICES
The safety devices protect the user and the appliance. They
must not be tampered with or used for other than their desi-
gnated purpose.
Safety thermostat:
This protects the high pressure water
circuit in the event of blockages or overheating. It can be reset
manually or automatically.
Safety device on lance handgrip:
Prevents the trigger on the
handgrip from being operated accidentally.
Thermal cutout:
stops the high pressure washer if the electric
motor overheats.
WATER CIRCUIT CONNECTION
Connect the feed hose to the mains (fig. 5A) and to the hosetail
on the cleaner (fig. 5B).
FILLING THE DETERGENT
TANK
The detergent tank is not in-
cluded with the water cleaner.
Use a container that is suitable
for holding detergents.
The water cleaner is designed
for the alternative use of two
different detergents from two
separate tanks (fig.2).
Detergent tanks are available
as optional accessories.
Warning
From the range of recommen-
ded products, choose the one
most suited to the washing job
to be done (fig. 3) and dilute
it with water according to the
instructions on the pack.
Ask your dealer for the cata-
logue of the detergents that
can be used depending on
the type of washing job to be
done and the type of surface
to be treated.
After using a detergent, the
detergent intake circuit must
be flushed out with clean
water.
!
!
!
FIG. 2
FILLING THE WATER SOF-
TENER TANK
Fill the tank with water soften-
er solution. Use only products
recommended by the manu-
facturer and/or dealer. Follow
the instructions given on the
packaging meticulously. (Do
not disperse water softener in
the environment).
!
FIG. 4
!
Anti-Scale
Anti-Scale
Chemical
1
Chemical
2
Chemical
Chemical
1
Chemical
2
Chemical
Summary of Contents for D 1710
Page 101: ...Note Notes ...