emu3/emu3ACO Operation Guide 23
Version 2.1
Performing a software upgrade
Performing a software upgrade
This section explains how to upgrade an emu3 or emu3ACO unit using a USB stick supplied by IPE Ltd.
Proceed as follows:
1.
Power up the unit.
2.
Wait for the
LAN
LED to flash.
3.
Ensure the unit is available in the IPE Dashboard web application.
4.
Insert the
Software Upgrade
USB stick into one of the front panel
USB
ports.
The 12 channel indicator LEDs will sequence on/off from left to right to left.
5.
When the display changes to the LEDs all pulsing in unison, remove the USB stick.
6.
When the LEDs stop flashing, the unit upgrade is complete and it will perform a reboot. After the unit has
rebooted and started up its network procedures it will be available for use in the IPE Dashboard.