emu3/emu3ACO Operation Guide 9
Version 2.1
Installation Instructions
7.
Click on the gear icon to display the unit’s Configuration page.
8.
Click on the down arrow to expand the
Network Settings
panel.
9.
Enter the settings appropriate for your network’s IP address space:
–
Host Name
: If required, enter a text string to identify your Master unit.
–
Mode
: Choose from
Static
or
DHCP
.
–
If you chose Static, enter an appropriate
IPv4 Address
,
IPv4 Network Mask
and
IPv4 Gateway
machine for
your LAN.
10.
Click
OK
.
11.
Once the unit has rebooted, remove the power and LAN cables.
12.
If necessary, reconfigure your standalone PC to its original IP address settings.
13.
Go to the next section, “Install the units and make earth connections” on page 10.