iPECS ClickCall User Guide - Issue 1.3
9
PBX
The PBX code is used when the CO Line of the host iPECS system connects to another PBX. It
is added after CO Line access code.
Long Distance
The Long Distance code is used for long distance calls and is used with the PBX code when
dialing long distance through the PBX.
Add a zero before the area code when dialing within the country
When enabled, a zero is added before the Area code when dialing within the country. For
example, if you set CO as ‘9’ and Nation as 82 and highlight the 82-2-2155-4393, then
the iPECS ClickCall shows 90221554393, removing the Nation code, adding zero before the
Area code and adding the CO Line access code.
Advanced
The iPECS ClickCall improves user convenience using ‘Advanced Dialing Information’ and
‘Special Dialing Information’ as discussed below.
Advanced Dialing Information
►
Insert Numbers if ‘=’ is found:
If ‘=’ is found in the highlighted number, it is replaced with the
assigned digits.
►
Dial area access code in same area:
If the Area code is required for local dialing, the ‘Dial
Area Access Code In Same Area’ option must be checked.
Summary of Contents for ClickCall
Page 26: ......
