LDP-9008D & LDP-9030D
User Guide
39
9.
PBX,
C
ENTREX
&
ISDN
FEATURES
9.1 Access PBX or Centrex features
The iPECS system has been designed to operate with a host
PBX system or Centrex services from your service provider.
The iPECS system connects to a host with analog CO lines.
When accessing a CO line, the phone will act as an extension
of the host, allowing access to the host system features using
the host dial codes. While on a call, use the
Flash
feature to
transfer calls to other host extensions or access features of the
host.
The Flash feature may be used on other CO lines to regain dial
tone from the CO line without relinquishing control of the CO
line to place another call.
To access PBX or Centrex features while idle:
•
Lift the handset,
•
Select/dial access a PBX/Centrex CO line,
•
Dial PBX/Centrex feature code.
To access PBX/Centrex features while on a
PBX/Centrex CO line:
•
Select the
Flash
soft button,
•
After receiving new dial tone, dial the PBX/Centrex feature
code.
9.2 Access the ISDN Network
9.2.1 Using the Keypad facility to access ISDN
features
Access to certain features of your ISDN services requires that
dialed digits be sent to the ISDN as data and not tones. In this
case, dialed digits are sent as ‘Keypad messages’.
A Keypad Facility button must be assigned using the
Flex
Button program
procedures. Once active, dial into the ISDN for
services; however, actions other than dialing will deactivate the
Keypad Facility operation.
