LIP-7024LD
User
Guide
5.4.1 Setting up a Conference Room
In addition to establishing a Conference, up to 9
Conference Rooms
can be set up letting up to 24 parties converse when using a MCIM.
When setting up a Conference Room, a password can be designated for
invited parties (internal and external parties) to use for accessing the
established Conference Room.
OPERATION
To set-up a Conference Room:
•
Press the
TRANS
/
PGM
button,
•
Dial 53 to create a Conference Room,
•
Dial the desired Conference Room number (1-9),
•
If desired enter a password for the Conference Room (up to 12
digits),
•
Press
HOLD
/
SAVE
to establish the Room.
To join a Conference Room:
•
Lift the handset,
•
Dial 59 (Conference Room entry code),
•
Dial the Conference Room Number,
•
Dial the Conference Room password.
To delete a Conference Room:
•
Press the
TRANS
/
PGM
button,
•
Dial 54 (delete Conference Room code),
•
Dial the Conference Room number (1-9),
•
Dial the Conference Room password,
•
Press
HOLD
/
SAVE
to delete the Conference Room.
5.5
Call Park: Placing a call on Hold to Page
A user may transfer an active CO/IP call to a special holding location
(Park Orbit), which can be accessed easily from any station in the
system. Typically, this feature is used with
Paging
to notify the desired
user of a parked call.
Parked calls are subject to
Hold Recall
after the Call Park timer.
OPERATION
To park an active external call:
•
Press
TRANS
/
PGM
,
•
Dial the Park Orbit (601-610 for iPECS-100 or 601-619 for iPECS-
300 & 600),
•
Return to idle.
To retrieve a parked call:
２９
