12
LIP-9002 User Guide - ST
3.
Receiving Calls
3.1
Answering a Call While Idle
There are three basic types of incoming calls; internal/external ringing calls,
Intercom Voice Announce calls
, and
Hold
recalls.
Your phone may be assigned
Ringing Line Preference
; in this case, calls
that ring are answered by lifting the handset. Otherwise, you must press the
flashing flexible button. External calls to an iPECS Phone will appear under
the outside line or line group buttons. For external calls,
Delay Ring
may be
assigned allowing others to answer the call before the call rings at your
phone.
Calls may forward to your phone from another user; if providing call
coverage for other users, you may also receive
Station Call Coverage
calls.
Calls placed on
Hold
, including Transfers, parked calls, etc. will recall if left
on hold for too long.
ICM Voice Announce
calls are answered based on the ICM Signaling
mode at the receiving phone; in Hands-free (HF) mode, after the splash
tone and announcement, speak normally into the microphone. In the
Privacy (PV) mode, lift the handset to respond. You can assign the
ICM
Signaling mode
as discussed in
9.1 Entering Station Program Data
The LCD will display the calling number or, if available, the name of the
station or outside line,
CO Line Name Display
.
.
To answer a call ringing at your phone:
Lift the handset or press the flashing flexible button (as needed), the call
will be connected.
To respond to an Intercom Voice Announce call:
In
HF
mode, simply speak as normal into the microphone,
OR
In
PV
mode, lift the handset to respond.
