Page 2 of 7
6-foot Freestanding Slide Installation
STEP: 1
Install posts according to the General
Information Guide. After installing
the posts, using one (1) M10*35 bolt,
two (2) M10 washers, and one (1)
M10 lock nut, attach the deck to the
pre-attached deck clamp, as shown
in the image. Repeat this process for
the other deck clamp.
STEP: 2
Connect half of the 3.5-inch tube
clamp to the guardrail using one (1)
M8*30 bolt. Set the guardrail into
place, then attach the second half of
the clamp using the hardware
provided in the clamp bag.
1 Playground Drive
Greenfield, IN 46140
1-800-667-0097
