2-11
Using Your Device
Unpacking Instructions
Unpacking Instructions
N o t e
If the packaging shows any signs of external damage, check unit for damages and
notify the shipping agent immediately.
Particular care must be taken when you remove the unit from the packing case to
ensure that the fiber optic cable is not broken or damaged. A comprehensive packing
list is included with the system documentation.
Upon receipt of the laser, check all items against this list and contact IPG immediately
if any of the items are missing or if any damage to the unit is evident. If any damage
to the unit is evident or suspected, do not attempt to install or operate the laser in any
case.
CAUTION: Lift and carry the device by supporting the device from the base.
Use the handles (if available for your device) to help position the product while
it is properly supported. Do not use the handles for lifting or carrying the device.
Do not lift or position the device by any attached fibers or cables.
Laser models that are smaller and relatively lighter are packaged in foam insulated
cardboard boxes. See “Unpacking a Unit from a Cardboard Box” on page 2-11.
Laser models that are larger and relatively heavy are packaged in foam insulated
wooden crates. See “Unpacking a Unit from a Wooden Crates” on page 2-14.
To minimize the risk of damage to your system, IPG Photonics recommends that you
unpack your laser using the following procedures.
Unpacking a Unit from a Cardboard Box
See Figure 2-9 on page 2-13 for an illustration of this procedure.
To unpack your unit from a cardboard box:
1. Place the package on a stable surface such as the floor or a large table.
2. For international shipments, remove the external box to access the primary box.
3. Open the primary box and remove the foam cover and store for later use.
4. Place the fiber on top of the unit and carefully lift it out of the box. IPG strongly
recommends two people to lift the unit at all times.
5. Open the internal box and remove the top foam insert.
Summary of Contents for QCW YLR-150
